ALCAPLAST AM115/1000V RENOVMODUL

Odour removal directly from the WC bowl
Can be connected to a extraction fan (not included)
Recommended fan flow rate 30 m3 / h, a pressure of 60 Pa and a check valve, the fan must be positioned at least at a height of 1.2 m from the floor
Sliding rail holder for the waste connector can be set to eight positions between 0-93 mm
Angle valve with the ability to connect to the Mepla piping system
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens
the vibrations from the tank into the building structure
Removable piece of polystyrene allows for easy access during installation
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from the rear / top
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1062 mm
Mounting depth adjustable from 20–95 mm
Installation depth 125 mm
Material of the load bearing structure: galvanized metal

Description

Product code	AM115/1000V
EAN	8595580550653
Water connection from the back or top via mounting holes	G1/2 “
Functional range of water pressure	0,05 – 0,8 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
The default setting of large flush	6 l
The default setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg
Technical sheet	Download

For wall-hung WC
For walling in and around the bearing wall – wet process
Suitable for reconstruction
Preparation for the connection to the ventilation system
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Scope of supply

Cistern with fill and flush valve
Galvanized frame including supporting structure
Fittings 1/2″ water connection with the integrated angle valve Schell 1/2-3/8″
Flushing mechanism screw 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Elbow HT for connection to the ventilation system
Plug for plugging the exhaust outlet if not used