ALCAPLAST AM101/1120V SÁDROMODUL

Odour removal directly from the WC bowl
Can be connected to a extraction fan (not included)
Recommended fan flow rate 30 m3 / h, a pressure of 60 Pa and a check valve, the fan must be positioned at least at a height of 1.2 m from the floor
Adjustable anchor feet and a spring-lock system, with a range of 0-200 mm
Visible marks for both leveling and the center-line
Sliding rail holder for the waste connector can be set to eight positions between 0-93 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the ibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting depth adjustable from 20–95 mm
Installation depth 125 mm
Frame material: powder-coated metal

Description

Product code	AM101/1120V
EAN	8595580550615
Water connection from the back or top via mounting holes	G1/2 “
Functional range of water pressure	0,05 – 0,8 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
The default setting of large flush	6 l
The default setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg
Technical sheet	Download

For wall-hung WC
For mounting in front of a support wall or in to a plasterboard construction
For floor thickness 0-200 mm
Preparation for the connection to the ventilation system
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Scope of supply

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2″ water connection with the integrated angle valve Schell 1/2-3/8″
Flushing mechanism screw 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Elbow HT for connection to the ventilation system
Plug for plugging the exhaust outlet if not used